Freze conice din carbură solidă

O moara conică uses a tapered cutting section instead of a straight side profile. Cumpărătorii pot folosi, de asemenea, termeni precum Tăietor conic sau taper milling cutter for this broad tool family. Because taper angle, diametru, lungimea de tăiere, and end geometry work together, the final tool specification should match the actual part feature and machining requirement.

Tapered End Mill Specifications and Manufacturing Options

Tapered end mills combine several related dimensions, so one general size table cannot represent every geometry. Buyers should review the tip diameter, diametrul maxim de tăiere, unghi de conicitate, lungimea flautului, diametrul tijei, and overall length together when selecting or customizing the tool.

Across the factory’s solid carbide milling range, available cutter diameters extend from approximately Ø0.1 to Ø25 mm. Cu toate acestea, the feasible diameter range for a specific tapered end mill depends on its taper, geometria finală, lungimea de tăiere, and overall tool design.

Pentru dimensiuni nestandard, we confirm the final combination from the required tool geometry, desen, and machining requirement rather than from a general end mill size table.

Taper Angle and Dimension Definition

Taper angle is one of the main dimensions to confirm before manufacturing a tapered end mill.

A drawing may show either an unghi pe latură or an unghi inclus. These values are different. Pentru o conicitate simetrică, unghiul inclus este egal cu dublul unghiului pe latură. Prin urmare, the drawing should clearly identify which angle definition it uses.

Because these dimensions affect one another, the taper angle and diameter should be reviewed together with the required cutting length and end geometry.

When a drawing is available, please indicate whether the marked angle is an angle per side or an included angle. This helps avoid ambiguity during quotation and production.

Tapered End Mill Types

Tapered Square / Moara plată

A tapered square end mill combines a tapered cutting section with a flat cutting end. It suits features that require tapered sidewalls together with a flat-bottom profile or defined lower surface.

Buyers may use both freză cu capăt pătrat conic şi tapered flat end mill for this general cutting geometry. Vizualizați Freză conică pătrată for standard reference sizes, angle-per-side options, and custom configurations.

Freză de capăt conică

A tapered ball nose end mill combines tapered cutting edges with a rounded ball end. This geometry suits curved surfaces, cavitățile de mucegai, 3D profiles, and other features that require a rounded cutting end. Vizualizați Freză de capăt conică for radius, taper-angle, and custom size options.

Freză de capăt cu rază de colț conică

A tapered corner radius end mill has a tapered cutting section with a corner radius between the bottom and side cutting edges. It suits part profiles that require a flatter bottom together with a radius at the corner. Vizualizați Freză de capăt cu rază de colț conică for diameter, corner-radius, taper, and custom geometry options.

Miniature tapered designs are also available within selected geometries. Because tip diameter, taper, lungimea flautului, and end style are interrelated, micro-size tools should be reviewed as a complete tool specification rather than by diameter alone.

Custom Reverse Taper End Mill

We handle reverse taper end mills as custom tools rather than one fixed standard configuration. Pentru aceste cerințe, we review the reverse taper, profile, dimensiuni, and machining feature from the available drawing before confirming the final tool design.

Workpiece Materials and Applications

We can configure solid carbide tapered end mills for different workpiece materials, inclusiv:

• Oțel aliat
• Oţel inoxidabil
• Oțel călit
• Aluminum Alloys
• Fontă
• Titan și aliaje rezistente la căldură
• Grafit
• Selected Composite Materials

For hardened materials, high-hardness tool series are available for applications up to approximately HRC68. Calitatea de carbură, acoperire, configurație flaut, and tool geometry should match the actual workpiece and machining conditions.

Typical applications include tapered walls, cavitățile de mucegai, tapered grooves, deep features, angled profiles, and special CNC profiles.

The end geometry should also match the machined feature. De exemplu, square or flat ends suit flat-bottom features, while ball nose and corner radius designs serve different curved or radius profile requirements.

For detailed application and selection guidance, vedea Pentru ce sunt folosite frezele conice.

Custom Tapered End Mill Manufacturing

We can produce custom tapered end mills according to the required taper, dimensiuni, geometria finală, acoperire, și aplicație de prelucrare. Pentru unelte non-standard, please send the available drawing, eșantion de informații, or machining requirement for review. We will confirm the final specification and manufacturability according to the actual tool design and application.

For broader non-standard tooling requirements, vedea Unelte de tăiere personalizate.

FAQ About Tapered End Mills

Can you manufacture tapered end mills according to drawings?

Da. We can review standard and non-standard tapered end mill requirements from a tool drawing, desenul piesei, existing tool specification, sau cerința de prelucrare. Final manufacturability is confirmed after the design is reviewed.

Is there a fixed MOQ for custom tapered end mills?

No single MOQ applies to every tapered cutter. Order quantity depends on the tool geometry, dimensiune, și cerințe de personalizare, so we confirm it with the specific quotation.

What should I provide for a tapered end mill quotation?

Send the available drawing, existing tool specification, sau cerința de prelucrare. We will review the information and confirm any additional details needed before quotation.

Send Your Tapered End Mill Inquiry

Need a standard or custom solid carbide tapered end mill? Trimiteți cerința dvs. de desen sau prelucrare prin E-mail, sau contactați-ne pe WhatsApp if you prefer. We will review the tool geometry and application requirements, then confirm the suitable configuration before quotation.