ロングネックコーナーラジアスエンドミル

Long Neck Corner Radius End Mill Specifications

A long neck corner radius end mill combines a defined corner radius with an extended neck section for machining features that require additional reach and clearance.

The catalog includes multiple combinations of cutting diameter, コーナー半径, 刃の長さ, 有効長とネック径. Use the ranges below for initial selection rather than treating every dimension as freely interchangeable.

R0.1, R0.2 and R0.5 mm are discrete catalog radius options. Available cutting diameter, 半径, L1, L2 and neck-diameter combinations depend on the selected catalog series and tool size.

For other extended-reach end geometries, 見る ロングリーチエンドミル

小径製品のラインナップ拡大に向けて, 見る マイクロエンドミル.

Long Neck Clearance and Corner Radius Geometry

コーナー半径 / Bull Nose Cutting Geometry

Corner-radius geometry keeps a flat-ended cutting profile while adding a defined radius between the end and side cutting edges.

この商品グループでは, bull nose is a related name for the same general corner-radius geometry. The actual radius and tool dimensions should still be checked when selecting a specific model.

The confirmed standard radius options for this series are:

R0.1 / R0.2 / R0.5 mm

For general corner-radius or bull-nose milling where additional neck clearance is not required, 見る ブルノーズエンドミル.

Long Neck Clearance for Restricted Features

The extended neck creates additional clearance between the cutting section and the larger shank area. This helps the tool reach recessed features where surrounding walls, shoulders or other workpiece geometry could interfere with a standard-reach tool.

Long neck and long reach are closely related market terms, but the product name alone should not determine tool selection. Check the cutting diameter, effective length and neck diameter against the actual feature geometry.

Where a selected catalog model has a neck diameter smaller than its cutting diameter, the smaller neck section provides additional clearance. This relationship should be confirmed for the selected size rather than assumed across the entire series.

切断径, Corner Radius and Effective Length Selection

Cutting Diameter and Corner Radius Options

溝に応じた切削直径から始めます, pocket or feature the cutter must enter. 必要な加工領域と部品形状に適合する直径を選択してください.

Then select the corner radius according to the required radiused transition. This catalog series provides three confirmed options:

R0.1 mm / R0.2 mm / R0.5 mm

These are discrete catalog options, not a continuous R0.1–0.5 mm range.

Confirm the cutting diameter and corner radius together because not every diameter and radius combination is available with every L1, L2 or neck diameter.

If the feature requires square / flat geometry without a corner radius, 見る ロングネックスクエアエンドミル.

If the feature requires ball-end geometry instead, 見る ロングリーチボールエンドミル.

有効長とネック径

有効長 (L2) 切削領域が溝の奥深くに位置する場合に重要になります, 空洞, ポケットまたはその他の凹み部分.

L2 が長いと追加のアクセスが可能になります, while the neck diameter determines the available clearance around the tool between the cutting section and surrounding workpiece geometry.

フルートの長さ (L1) represents the cutting-edge length and should be checked separately from L2. A longer effective length does not automatically mean a longer cutting edge.

Because cutting diameter, L1, L2 and neck-diameter combinations vary by catalog size, confirm these dimensions together when selecting a tool.

ご希望の組み合わせがカタログ標準サイズと一致しない場合, 見積の前にレビューのために図面またはスケッチを送信します.

Applications for Long Neck Corner Radius End Mills

深い溝, 空洞とポケット

Long neck corner radius end mills suit deep or restricted features that require both additional access and corner-radius cutting geometry.

一般的な用途には深溝フライス加工が含まれます。, 深キャビティフライス加工, ディープポケットフライス加工, narrow pockets and other restricted-access features where a standard tool body does not provide enough clearance.

The long-neck section allows the cutting end to reach the required machining area while keeping the larger tool body away from surrounding geometry.

Tool selection should follow the actual feature depth, available clearance, cutting diameter and required corner radius rather than simply choosing the longest available configuration.

Flat Bottoms and Radiused Internal Corners

This geometry is useful when the machined feature requires a flat-bottom area together with a radiused transition between the bottom and side wall.

The corner radius distinguishes it from a sharp square-end tool, while the long-neck structure provides additional access for deeper features.

For internal corner-radius machining, confirm both the required radius and available tool clearance against the workpiece geometry before selecting the catalog size.

Long Neck Corner Radius End Mill vs Standard-Reach Bull Nose End Mill

Both tools use corner-radius / bull-nose cutting geometry. The main difference is the reach and clearance available around the tool.

Choose a standard-reach bull nose end mill when the tool body can reach the feature without interference.

Choose a long neck corner radius end mill when the same corner-radius geometry is required deeper inside the workpiece or when additional neck clearance is necessary.

Custom Long Neck Corner Radius End Mills

標準カタログサイズは、切断径の複数の組み合わせをカバーします, コーナー半径, 刃の長さ, 有効長さ, 首の直径, シャンク径と全長.

For non-standard long-neck or long-reach corner-radius requirements, 必要な寸法を示す図面またはスケッチを送信してください. 見積前に要求された構成を確認し、製造の実現可能性を評価できます。.

カスタム サイズと構成は、図面のレビューと製造の実現可能性の影響を受ける.

FAQ

Are long neck and long reach corner radius end mills the same?

The terms often describe similar extended-access tool concepts, but naming can vary. Check the cutting diameter, 有効長さ, neck diameter and other dimensions when selecting a specific tool instead of relying only on the product name.

Is a corner radius end mill also called a bull nose end mill?

Bull nose is commonly used for corner-radius end mill geometry. しかし, naming can vary between suppliers, so confirm the actual end geometry and corner radius when selecting a tool.

How do I choose the cutting diameter, corner radius and effective length?

Start with the feature size to determine the cutting diameter. Then select the required corner radius and check Effective Length (L2) against the required reach.

Also confirm the neck diameter against the available side clearance.

When should I choose a long neck corner radius end mill instead of a standard-reach bull nose end mill?

Choose the long-neck version when the feature requires additional reach or neck clearance. If the machining area is normally accessible, a standard-reach bull nose end mill may be sufficient.

Can you manufacture a custom long neck corner radius end mill from a drawing?

規格外の刃径の見直しも可能です, コーナー半径, 刃の長さ, 有効長さ, 首の直径, 図面またはスケッチに基づいたシャンク直径と全長の要件.

Send Your Long Neck Corner Radius End Mill Inquiry

Send your long neck corner radius end mill inquiry by email, または下記までお問い合わせください ワッツアップ.